Is water heater repair in Winder a big deal? That’s a yes and no question. If you hire a plumber with these skills, it’s in the bag.
Water heater repair in Winder doesn’t need to be a big deal. It can be as simple as picking up the phone if you know who to call. So how do you decide who to hire to fix your water heater without drowning you in problems and debt?
What Kind of Repair Might My Winder Hot Water Heater Need?
When your water heater needs repair, it is due to one of four reasons: 1. It takes much longer for water to heat than it used to; 2. It runs out of hot water way too soon; 3. It doesn’t heat any water at all; or 4. It’s leaking water everywhere. We will look at each one to discuss whether you need to call a plumber for this kind of repair.
Have you noticed you hide in the back corner of the shower waiting for the water to heat? If you aren’t getting enough hot water or waiting too long for the water to heat, there are a few possible culprits at work.
Before you do anything else, check the circuit breaker in your house and the reset button on the water heater. This could solve the problem. If there was an interruption to the power flow that tripped a breaker, all you need to do is flip it back, and everything should work fine. Keep in mind, though, if it happens again: something caused the problem, and you should have it checked by a professional.
If everything is fine with the circuit breaker, then you’re looking at an electrical problem inside your water heater. It could be the thermostat. The thermostat regulates the temperature of the water. When it breaks, it doesn’t open the valve to release the water out of the heater to the pipes. A new thermostat is the answer to the problem. Another issue could be the limit switch. Your water heater has a safety switch known as the limit switch. If the water reaches a certain temperature, it will trip this switch to disconnect the power as a precaution. If your water heater trips the breaker, this could be the problem.
Most water heaters have two heating elements. If either of these burns out, you will not have the amount of hot water you desire. You could also have a problem with some loose wiring preventing a stable connection. You can check these difficulties with a non-contact voltage detector. Always remember, you need to disconnect the water heater from the power before you attempt any troubleshooting. We’re talking 240 volts of electricity here. If the words “voltage detector” send a little shock wave up to the hair on the back of your neck, you should call your neighborhood plumber.
What If I Have Water Leaking Everywhere In Winder From My Hot Water Heater Repair Problem?
There is one water heater repair problem that is almost always bad news. If you notice water leaking from the bottom of your water heater, you need to pay attention fast. First, disconnect the power supply for safety. After you contain the mess with a mop, it’s time to call a plumber. When your water heater leaks, it is akin to a pronouncement of death. If the leak is coming from the tank, you will probably have to buy a new water heater. The leak could be coming from a drain valve, but if you have a lot of water on the floor, it’s time to go shopping.
Knowing a local plumber you can count on can save you a lot of frustration. Whether you have leaking pipes, dripping faucets or other plumbing headaches, we can help you get rid of the problem. If you’re experiencing troubles with water heater repair in Winder, rather than struggling with trying to figure out what the problem is, just click and contact Anthony Wimpey Plumbing right away.